Isospartic 640-1 is an optimized version of the Isospartic 640. The coating is 91% solids by volume, ZERO VOC, aliphatic, polyaspartic coating. It allows the user a 20-30 minutes of working time during application. It functions as a clear coat over quartz or chip flooring systems. This seamless system is stain resistant and exhibits extraordinary performance characteristics when applied over rigid substrates. It has excellent color and gloss stability, even under harsh UV exposure. This coating creates an extremely tough, chemical and abrasion resistant finish.
File Downloads
Technical Data SheetApplications
- Auto Showrooms
- Chemical Plants
- Clear Finish Coat for Various Decorative Concrete Applications
- Educational and Institutional Floors
- Hospital and Health Care Facility Floors
- Interior or Exterior Applications
- Manufacturing Facilities
- Residential, Commercial and Industrial Floors
Advantages
- 1:1 System by volume
- Chemical and Abrasion Resistant
- Excellent Color Stability and Clean-ability
- Extended Working Time with Rapid set times
- Hot Tire Stain Resistance
- Meets USDA Approvals
- Superior Gloss Retention
Product Types
Coating
Product Testing
| Test Performed | Test Results |
| % Solids - by Volume | 91 % |
| Abrasion Resistance - ASTM D4060 - 1000 gram load, 1000 revolutions, CS-17 wheels | 80 mg |
| Adhesion - ASTM D4541 - Elcometer | 400-500 psi |
| Color - POL | See Isotec color chart |
| Elongation - ASTM D412 | 15-25 % |
| Full Cure | 5-7 Days |
| Hardness - ASTM D2240 - Shore D | 60-65 D |
| Pencil Hardness | 2H |
| Pot Life - 100g | 30-40 Minutes |
| Ratio by Volume - ISO:POL | 1-1 |
| Recoat Window | 7-18 Hours |
| Recommended Film Thickness | 8-12 mils |
| Return to Service - Foot Traffic | 12-24 Hours |
| Tack Free Time | 3-7 Hours |
| Tear Strength - ASTM D624, Die C | 250-350 pli |
| Tensile Strength - ASTM D412 | 4000-5000 psi |
| VOC | 0 g/L |
| Working Time | 20-30 Minutes |