Isospartic™ 630 is a 85% solids by volume, ZERO VOC, aliphatic polyaspartic coating. This versatile system allows the user a solid working time of 15-20 minutes while maintaining a rapid tack free time of 1-2 hours. Functioning as a primer, basecoat, or topcoat, this coating creates an extremely tough chemical, UV, and abrasion resistant finish.
File Downloads
Technical Data SheetApplications
- Auto Showrooms
- Chemical Plants
- Clear Finish Coat for Various Decorative Concrete Applications
- Educational and Institutional Floors
- Hospital and Health Care Facility Floors
- Interior or Exterior Applications
- Manufacturing Facilities
- Residential, Commercial and Industrial Floors
Advantages
- 1:1 System by volume
- Chemical and Abrasion Resistant
- Excellent Color Stability and Clean-ability
- Extended Working Time with Rapid set times
- Hot Tire Stain Resistance
- Meets USDA Approvals
- Superior Gloss Retention
Product Types
Coating
Product Testing
| Test Performed | Test Results |
| % Solids - by Volume | 85 |
| Abrasion Resistance - ASTM D4060 - 1000 gram load, 1000 revolutions, CS-17 wheels | 80 mg |
| Adhesion - ASTM D4541 - Elcometer | 400-500 psi |
| Color - POL | See Isotec color chart |
| Elongation - ASTM D412 | 20-30 % |
| Full Cure | 3-5 Days |
| Hardness - ASTM D2240 - Shore D | 60-65 Shore D |
| Pencil Hardness | 2H |
| Pot Life - 100g | 15-30 Minutes |
| Ratio by Volume - ISO:POL | 1-1 |
| Recoat Window | 3-18 Hours |
| Recommended Film Thickness | 8-12 mils |
| Return to Service - Foot Traffic | 3-5 Hours |
| Return to Service - Heavy Traffic | 12-24 Hours |
| Tack Free Time | 1-2 Hours |
| Tear Strength - ASTM D624, Die C | 250-350 pli |
| Tensile Strength - ASTM D412 | 3000-4000 psi |
| VOC | 0 g/L |
| Working Time | 15-20 Minutes |