Isopoxy 309 FS (Fast Set) is a high performance; two component; 89% volume solids; fast set epoxy primer. Designed as a high solids primer prior to Isotec topcoats; or as a basecoat/broadcast system basecoat. This product can also be mixed with sand to create a slurry or mortar for repairing concrete surfaces prior to an Isotec coating system. Isopoxy 309 FS has good low temperature cure capabilities down to as low as 45°F. This product should always be top coated with an aliphatic product when long term color stability is a requirement.
Applications
- Chemical Plants
- Educational and Institutional Floors
- Interior or Exterior Applications if Top-Coated
- Manufacturing Facilities
- One Day Garage Floors
- Residential, Commercial and Industrial Floors
Advantages
- Chemical Resistant
- Conveniently Packaged for 2:1 Mix Ratio
- Excellent Adhesion to Concrete
- Fast Set for One Day Floors
- Low VOC
- Very Low Odor
- Withstands Traffic after 12 hours
Product Types
Coating
Product Testing
Test Performed | Test Results |
% Solids - by Volume | 89 % |
% Solids - by Weight | 91 % |
Adhesion - ASTM D4541 - Elcometer | 420-450 psi |
Elongation - ASTM D638 | 14.4 % |
Full Cure | 2-3 Days |
Hardness - ASTM D2240 - Shore D | 70 D |
Impact Resistance - ASTM D2794 | 50 in*lbs |
Pot Life - 100g | 15-25 Minutes |
Ratio by Volume - (Resin:Activator) | 2-1 |
Recoat Window | 5-12 Hours |
Recommended Film Thickness | 5-10 Mil |
Return to Service - Foot Traffic | 8-12 Hours |
Tack Free Time | 2.5-5 Hours |
Tensile Strength - ASTM D638 | 2,000-2,500 psi |
Theoretical Coverage per Gallon - 10 mils DFT | 140-150 sqft |
VOC | 108-115 g/L |
Working Time | 20-25 Minutes |