IsoMold CMR 8001 UV Gray is a two component polyurethane molding system. IsoMold CMR 8001 UV Gray is mixed one-to-one by volume and cures at room temperature. IsoMold CMR 8001 UV Gray cures to a hard (shore A 80±2) rubber in 48 hours. IsoMold CMR 8001 UV Gray is used to make molds of detailed masters that contain some undercuts. It has excellent release characteristics to make molds for concrete stamp pads; sculpture reproductions; special effects and point-of-purchase displays.
Applications
- Concrete Stamp Pads
- Point of Purchase Displays
- Sculpture Repoductions
- Special Effects
Advantages
- Convenient Mixing Ratio
- Excellent release characteristics
- Low shrinkage
- Modified to offer UV protection
- Picks up fine detail in molding/casting applications
Product Types
Concrete Mold Rubber
Product Testing
| Test Performed | Test Results |
| Color - ISO | Colorless-pale yellow |
| Color - POL | Gray |
| Compressive Strength - ASTM D695 - @ 10% Strain | 20 psi |
| Compressive Strength - ASTM D695 - @ 20% Strain | 110 psi |
| Compressive Strength - ASTM D695 - @ 30% Strain | 320 psi |
| Demold Time | 12-24 Hours |
| Elongation - ASTM D412 | 480 % |
| Full Cure | 7 Days |
| Hardness - ASTM D2240 - Shore A | 78-82 Shore A |
| Initial Cure Time | 48-72 Hours |
| Linear Shrinkage - ASTM D2566 - 2 weeks @140F | 0.01 % |
| Mix Time - by Hand | 1-2 Minutes |
| Pot Life - 100g | 8 Minutes |
| Ratio by Volume - ISO:POL | 1:01 |
| Ratio by Weight - ISO:POL | 48.7:51.3 |
| Rebound, Bayshore % - ASTM D2632 | 45 % |
| Tear Strength - ASTM D624, Die C | 280 pli |
| Tensile Modulus - ASTM D412 | 1700 psi |
| Tensile Modulus - ASTM D412 - 100% | 740 psi |
| Tensile Modulus - ASTM D412 - 200% | 1000 psi |
| Tensile Modulus - ASTM D412 - 300% | 1200 psi |
| Tensile Strength - ASTM D412 | 1680 psi |
| Trouser Tear - ASTM D624, Die T | 50 pli |