IsoMold CMR 3001 is used to make molds of detailed masters that contain some undercuts. IsoMold CMR 3001 was specifically designed to be used with pigmented and non-pigmented concrete. It has excellent release characteristics and durability. IsoMold CMR 3001 is a two-part polyurethane molding system. IsoMold CMR 3001 is mixed one-to-one by volume and cures at room temperature. IsoMold CMR 3001 cures to a soft (Shore A30 ± 2); rubber.
File Downloads
Technical Data SheetApplications
- Concrete casting applications
- Point of Purchase Displays
- Sculpture Repoductions
Advantages
- Convenient 1:1 mixing ratio
- Excellent release characteristics
- High tear strength and elongation
- Low shrinkage
- Picks up fine detail in molding/casting applications
Product Types
Concrete Mold Rubber
Product Testing
| Test Performed | Test Results |
| Color - ISO | Cololess-Pale Yellow |
| Color - POL | Gray, white |
| Demold Time | 16-24 Hours |
| Elongation - ASTM D412 | 600 % |
| Full Cure | 7 Days |
| Hardness - ASTM D2240 - Shore A | 28-32 Shore A |
| Initial Cure Time | 48-72 Hours |
| Linear Shrinkage - ASTM D2566 | 0 % |
| Mix Time - by Hand | 1-2 Minutes |
| Pot Life - 100g | 15-17 Minutes |
| Ratio by Volume - ISO:POL | 1-1 |
| Ratio by Weight - ISO:POL | 1-1 |
| Tear Strength - ASTM D624, Die C | 85 pli |
| Tensile Modulus - ASTM D412 | 120 psi |
| Tensile Modulus - ASTM D412 - 100% | 110 psi |
| Tensile Modulus - ASTM D412 - 200% | 180 psi |
| Tensile Modulus - ASTM D412 - 300% | 220 psi |
| Tensile Strength - ASTM D412 | 400 psi |
| Weight per gallon - ISO | 8.1 |
| Weight per gallon - POL | 8.1 |