IsoCoat URN 5143 is a 100% solids; fast set; 2 component elastomeric Polyurethane coating. This seamless system exhibits extraordinary performance over both rigid and flexible substrates. This coating creates an extremely tough; chemical and abuse resistant finish for a wide range of applications.
Applications
- Aquariums
- Cold storage areas
- Concrete or earthen containment areas
- Cooling tower liners
- Fertilizer plants
- Floor and wall systems
- General industrial plants
- Mechanical rooms
- Petrochemical plants
- Pipe coatings (interior/exterior)
- Pulp and paper mills
- Tank Linings
- Truck beds & steel coating
- Waste water tanks and facilities
Advantages
- Application possible from 40º F to 150º F
- Fast cure; can be handled/walked on in less than 1 hour
- Fungus resistant
- Higher Elongation & Greater Flexibility
- No VOC’s
- Resistant to many chemicals
- Resistant to thermal shock
- Seamless & can applied at any thickness
- Very fast gel time
Product Types
Coating
Product Testing
| Test Performed | Test Results |
| Color - ISO | Light Yellow |
| Color - POL | Black, Custom |
| Elongation - ASTM D412 | 160 % |
| Flash Point | >200 °F |
| Full Cure | 72 Hours |
| Gel Time | 8-12 Seconds |
| Hardness - ASTM D2240 - Shore A | 85-90 Shore A |
| Hardness - ASTM D2240 - Shore D | 33-35 Shore D |
| Ratio by Volume - ISO:POL | 1:1 |
| Ratio by Weight - ISO:POL | 1.1:1 |
| Specific Gravity - 74°F, ISO | 1.11-1.19 |
| Specific Gravity - 74°F, POL | 1.04-1.06 |
| Tack Free Time | 10-14 Seconds |
| Tear Strength - ASTM D624, Die C | 210 pli |
| Tensile Modulus - ASTM D412 | 1750 psi |
| Tensile Strength - ASTM D412 | 1450 psi |
| Viscosity - ASTM D-2196 - 74°F, ISO | 250-315 cps |
| Viscosity - ASTM D-2196 - 74°F, POL | 560-760 cps |