IsoCoat Roof Guard AL is a sprayable, VOC-free two-component, pure polyurea elastomeric membrane. Due to its aluminized make up, this coating is an ideal addition to a roofing system providing reflectivity and UV protection. Its low viscosity at operational temperatures makes it a product ideal for both in-plant and field applications. Unique properties of this coating are its rapid cure time and its insensitivity to moisture.
File Downloads
Technical Data SheetApplications
- Bridges
- Exterior pipe coating: DTM or over foam
- Exterior tank coating: DTM or over foam
- Industrial plants
- Mechanical rooms
- Pipe coatings
- Pulp and paper mills
- Roof Coating
Advantages
- Can be built up to any thickness in one application
- Fast cure; can be handled/walked on in one minute
- Near Instant Gel Time
- Resistant to many chemicals
- Resistant to thermal shock
- Seamless and flexible
- USDA Approved for Incidental Food Contact
- UV resistance
Product Types
Coating
Product Testing
| Test Performed | Test Results |
| Color - ISO | colorless-pale yellow |
| Color - POL | silver |
| Elongation - ASTM D412 | 800 % |
| Full Cure | 24 Hours |
| Gel Time | 7 Seconds |
| Hardness - ASTM D2240 - Shore D | 50 Shore D |
| Mandrel Bend - ASTM D522 - 1/4" Mandrel-20 C, 30-50mil Free Film | pass |
| Mandrel Bend - ASTM D522 - Conical Bend 1/32" Steel panel | pass |
| Ratio by Volume - ISO:POL | 1-1 |
| Tack Free Time | 10 Seconds |
| Tear Strength - ASTM D624, Die C | 475 pli |
| Tensile Strength - ASTM D412 | 3000 psi |