IsoCoat NRN 7060

IsoCoat NRN 7060 is a 100% solids; state-of-the-art; VOC-free; plural-component; pure polyurea elastomeric membrane. This seamless system exhibits extraordinary performance characteristics by creating a waterproof film that protects the surface beneath the coating. Isocoat NRN 7060 can withstand extreme mechanical loads; impacts and high abrasion and has excellent adhesion properties to both concrete and metal. This inherently sound dampening coating can be applied to be non-slippery. This membrane achieves an extremely tough; flexible; chemical and abuse resistant finish for a wide range of applications.

 

File Downloads

Technical Data Sheet

Applications

  • Aquariums
  • Cold storage areas
  • Concrete or earthen containment areas
  • Cooling tower liners
  • Fertilizer plants
  • Floor and wall systems
  • General industrial plants
  • Mechanical rooms
  • Petrochemical plants
  • Pipe coatings (interior/exterior)
  • Pulp and paper mills
  • Tank Linings
  • Truck beds & steel coating
  • Vehicle Frame & Body Coating
  • Waste water tanks and facilities

Advantages

  • Fast cure; can be handled/walked on in less than 1 minute
  • Fungus resistant
  • Higher Elongation & Greater Flexibility
  • Near Instant Gel Time
  • Resistant to many chemicals
  • Resistant to thermal shock
  • Seamless & can be applied at any thickness
  • USDA Approved for Incidental Food Contact
Product Types

Coating

 

Product Testing

Test PerformedTest Results
Color - ISOLight Yellow  
Color - POLBlack  
Elongation - ASTM D412250 % 
Flame Spread - ASTM E108Class A  
Flame Spread - FMVSS 302Pass  
Flexural Modulus - ASTM D79056000 psi 
Full Cure24 Hours 
Hardness - ASTM D2240 - Shore D50-51 Shore D 
Moisture Vapor Transmission (30 mils) - ASTM E96.02  
Ratio by Volume - ISO:POL1:1  
Ratio by Weight - ISO:POL1.1:1  
Sprayed Gel Time3-4 Seconds 
Sprayed Tack Free Time10-12 Seconds 
Tear Strength - ASTM D624, Die C450 pli 
Tensile Modulus - ASTM D412 - 100%1800 psi 
Tensile Strength - ASTM D4122500 psi