Isopoxy 309 FS

Isopoxy 309 FS (Fast Set) is a high performance; two component; 89% volume solids; fast set epoxy primer. Designed as a high solids primer prior to Isotec topcoats; or as a basecoat/broadcast system basecoat. This product can also be mixed with sand to create a slurry or mortar for repairing concrete surfaces prior to an Isotec coating system. Isopoxy 309 FS has good low temperature cure capabilities down to as low as 45°F. This product should always be top coated with an aliphatic product when long term color stability is a requirement.

 

Applications

  • Chemical Plants
  • Educational and Institutional Floors
  • Interior or Exterior Applications if Top-Coated
  • Manufacturing Facilities
  • One Day Garage Floors
  • Residential, Commercial and Industrial Floors

Advantages

  • Chemical Resistant
  • Conveniently Packaged for 2:1 Mix Ratio
  • Excellent Adhesion to Concrete
  • Fast Set for One Day Floors
  • Low VOC
  • Very Low Odor
  • Withstands Traffic after 12 hours
Product Types

Coating

 

Product Testing

Test PerformedTest Results
% Solids - by Volume89 % 
% Solids - by Weight91 % 
Adhesion - ASTM D4541 - Elcometer420-450 psi 
Elongation - ASTM D63814.4 % 
Full Cure2-5 Days 
Gloss - 60 degrees>70  
Hardness - ASTM D2240 - Shore D70 D 
Impact Resistance - ASTM D279450 in*lbs 
Mixed Viscosity - ASTM D-2196 - (74°F)250-400 cps 
Pot Life - 100g22-35 Minutes 
Ratio by Volume - (Resin:Activator)2-1  
Ratio by Weight (Resin:Activator)3-1  
Recoat Window4-9 Hours 
Recommended Film Thickness5-10 Mil 
Return to Service - Foot Traffic8-12 Hours 
Taber Abrasion Resistance - ASTM D4060 - 1000rev, CS 1725 mg 
Tack Free Time3.5-6 Hours 
Tensile Strength - ASTM D6382,000-2,500 psi 
Theoretical Coverage per Gallon - 10 mils DFT150-175 sqft 
VOC108-115 g/L 
Skills

Posted on

December 18, 2020